Bearings

Single Row Angular Contact Ball Bearings  are designed to accommodate axial loads in one direction only. A single row angular Contact ball bearing is adjusted against a second bearing following different arrangements . i.e back to back, Face to Face or Tendem.

The bearing rings have one high and one low shoulder through  which contact angle is maintained.

The contact angle in between rings  is  40 degrees. The axial Load carrying capacity of angular contact ball bearing  increases with increasing contact angle.

Industries

• Pump
• Machine Tools
• Textile
• Gear Box

NRB Industrial Bearings self-aligning double-row spherical roller bearings are a combination of radial and axial bearings. These are designed to operate even if the shaft and housing are, or become, misaligned under load. The internal design of the spherical roller bearings enables them to withstand very high radial loads and axial loads in both directions. 

These types of heavy-duty bearings are the preferred choice when conditions include heavy loads, difficulties in establishing or maintaining housing alignment, or when shaft deflection is expected. These bearings can take high degrees of misalignment depending on the size and series of the bearing. shaft deflection and housing distortion caused by shock or heavy loads, which lead to misalignment, are compensated for by the internal self-alignment of the bearing elements during operation. 

Industries

• Mining
• Material Handling
• Agriculture

Bearings wide inner ring bearings provide easy slip fit shaft mountings and additional shaft support. These bearings feature seals with flared lips which firmly contact the ground outer diameter of the inner ring to provide a positive seal against dust, dirt and other contaminants while effectively retaining the lubricant. NRB Industrial Bearings wide inner ring bearings have a large grease capacity. These bearings are factory pre-lubricated.

Variations : Locking devices: eccentric locking collar, set-screw locking collar; inner ring extended both sides, inner ring extended one side only; Bearings with cylindrical outer diameter.

NRB Industrial Bearings offers wide inner ring bearings for shaft diameter between 19.05 mm to 60mm (.75" X 2.36"). We offer customized bearings for unique application requirements

Industries

• Agriculture
• Material Handling
• Fluid Machinery
• Industrial Transmission

Cam followers are designed to run directly on surfaces such as cams, ramps, and slide ways. They are used as track rollers, cam followers, and in a wide range of linear motion systems. In order to meet the operating conditions of heavy radial loads usually accompanied by repeated shocks. 

• Industries
• Factory Automation
• Metals
• Industrial Transmission